CARE AND MAINTENANCE
Unplug the appliance before cleaning. Do not use water to clean metal surfaces. Slightly
moisten a cloth with a mild cleaner and then wipe off the surfaces of the fan. In order to remove
dust from the protective guard, use a vacuum cleaner or remove the front protective guard
using a screwdriver to unscrew the securing screws on the edges of the guard. After cleaning,
replace the safety guard, and fasten the securing screws on the edges of the protective guard.
Attach the outer tube (11) to the base (16) with the
screws (13), flat washers (14), and spring washers (15) as
shown in the picture.
Caution: The screws must be fully tightened before
operating the fan.
Slide the height adjustable ring (10) away from the
outer tube (11). Save it to use it in Step 3.