Structure - Mitsubishi Electric FR-V5NE-E Instruction Manual

1.3 Structure

3) Dip switch
Mounting
hole
FR-V5NE
Name
1) RJ-45 modular jack
TX
RX
2) LED
LNK
3) Dip Switch
2) LED
Front view
TX
RX
LNK
Connect the 10BASE-T cable for Ethernet communication to make communication
with a personal computer.
Lit during send operation.
Lit during receive operation.
Indicate the connection status of the Ethernet cable, option board, etc. Lit when they
are properly connected.
Switches set by the manufacturer. Do not change. (All switches are factory-set to the
LOW side. Check for correct setting.)
1) RJ-45 modular jack
Mounting
holes
Option fixing holes
Function
2
PRE-OPERATION INSTRUCTIONS
Rear view
Connector
Mounting
hole