Enhanced Pci Audio Subsystem (Optional); Bios; Pci Auto Configuration; Ide Auto Configuration - Intel D815EEA Product Manual

Desktop board
Hide thumbs Also See for D815EEA:
Table of Contents

Advertisement

Enhanced PCI Audio Subsystem (Optional)

The board offers an optional subsystem of audio features supported by the following:
Creative Labs ES1373 digital controller
Crystal Semiconductor CS4297 (A) codec
NOTE
The line out connector is designed to power headphones or amplified speakers only. Poor audio
quality may occur if passive (non-amplified) speakers are connected to this output.
Audio drivers and utilities are available from Intel's World Wide Web site:
http://support.intel.com/support/motherboards/desktop/

BIOS

The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the PCI and IDE
auto-configuration utilities, and the video BIOS. The BIOS is stored in the Intel 82802AB
Firmware Hub.
The BIOS can be upgraded by following the instructions in Chapter 3.

PCI Auto Configuration

If you install a PCI add-in board in your computer, the PCI auto-configuration utility in the BIOS
automatically detects and configures the resources (IRQs, DMA channels, and I/O space) for that
add-in board. You do not need to run the BIOS Setup program after you install a PCI add-in
board.

IDE Auto Configuration

If you install an IDE device (such as, a hard drive) in your computer, the IDE auto-configuration
utility in the BIOS automatically detects and configures the device for your computer. You do not
need to run the BIOS Setup program after installing an IDE device.

Security Passwords

The BIOS includes security features that restrict whether the BIOS Setup program can be accessed
and who can boot the computer. A supervisor password and a user password can be set for the
Setup and for booting the computer, with the following restrictions:
The supervisor password gives unrestricted access to view and change all Setup options. If
only the supervisor password is set, pressing <Enter> at the password prompt of Setup gives
the user restricted access to Setup.
If both the supervisor and user passwords are set, you must enter either the supervisor
password or the user password to access Setup. Setup options are then available for viewing
and changing depending on whether the supervisor or user password was entered.
Desktop Board Features
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents