→ The key appears as
raised to the necessary height for free-motion
Select a stitch.
→ Free-motion open toe quilting foot "O" is indicated
in the upper-left corner of the screen.
If using straight stitch needle plate with the free-motion
open toe quilting foot "O" then the letter "C" will be
indicated in the upper-left corner of screen.
to set the machine to free-motion
, and the quilting foot is
Remove the presser foot holder.
Attach free-motion open toe quilting foot "O"
by positioning the pin of the quilting foot
above the needle clamp screw and aligning
the lower-left of the quilting foot and the
Needle clamp screw
Make sure that the quilting foot is attached properly
and is not slanted.
Hold the quilting foot in place with your right
hand, and tighten the presser foot holder
screw using the screwdriver with your left
Presser foot holder screw
• Be sure to tighten the screw securely with the
screwdriver. Otherwise, the needle may touch the
quilting foot, causing it to bend or break.
Use both hands to securely hold the fabric taut,
and then move the fabric at a consistent pace in
order to sew uniform stitches roughly
2.0-2.5 mm (approx. 1/16 - 3/32 inch) in length.
to cancel the free-motion sewing
Do not be discouraged with your initial results. The
technique requires practice.