Nokia N-Gage QD User Manual page 4

bout your N-Gage QD Snap-on Speaker
1. Volume wheel
2. On/off switch
3. Speaker grill
GETTING ST RTED
The N-Gage QD snap-on speaker will enable you to share game sounds wherever you
are.
2
4. Protective cover
5. Charging socket
6. Release button
ttaching the Snap-on Speaker
1
Remove the protective cover from the snap-on speaker (see fig 2) and attach the
snap-on speaker on the top of the N-Gage QD game deck. The snap-on speaker
attaches to the headset and the charger connector (see fig 4)
IMPORT NT: Calls cannot be made or received while the snap-on speaker is attached.
To make a call, remove the snap-on speaker before dialling the number.
To receive a call, remove the snap-on speaker before answering the call.
2 Using the Snap-on Speaker
To use the Snap-on Speaker turn it on using the ON/OFF switch on the left side of the
speaker. Adjust the volume using the Volume wheel.
3 Installing and replacing the Battery
Remove the battery cover on the back of the snap-on speaker by pressing the release
button and pushing the cover up. Install or replace the AAA battery and put the cover
back on. (See fig. 3).
4
Charging the N-Gage with the snap-on speaker attached
N-Gage QD game deck can be charged while the snap-on speaker is attached. Plug
in the original ACP-12 charger to the socket on the right hand side of the snap-on
speaker while the speaker is attached to the N-Gage QD. (See fig. 5).
Note: The snap-on speaker cannot be charged. Charging the N-Gage QD while the
snap-on speaker is attached does not affect the snap-on speaker battery life.
3