Sideburner - Kenmore 415.162080 Assembling Instructions

Liquid propane gas grill for outdoor use only
Hide thumbs Also See for 415.162080:
Table of Contents

Advertisement

LP Tank Exchange
• Many retailers that sell grills offer you the option of replacing
your empty LP tank through an exchange service. Use only
those reputable exchange companies that inspect, precision fill,
test and certify their cylinders.
an OPD safety feature-equipped tank as described in the
"LP Tank" section of this manual.
Always keep new and exchanged LP tanks in upright position
during use, transit or storage.
Leak test new and exchanged LP tanks BEFORE
connecting to grill.
LP Tank Leak Test
For your safety
Leak test must be repeated each time LP tank is exchanged or
refilled.
Do not smoke during leak test.
Do not use an open flame to check for gas leaks.
Grill must be leak tested outdoors in a well-ventilated area,
away from ignition sources such as gas fired or electrical
appliances. During leak test, keep grill away from open flames
or sparks.
• Use a clean paintbrush and a 50/50 soap and water solution.
Use mild soap and water.
cleaning agents.
Damage to gas train components can result.
Brush soapy solution
onto areas indicated
by arrows.
WARNING
If "growing" bubbles appear do not use or move the LP tank.
Contact an LP gas supplier or your fire department!
18 • 463843104
Exchange your tank only for
s
Do not use household
Connecting Regulator To The LP Tank
1.
LP tank must be properly secured onto grill. (Refer to
Assembly Manual)
2.
Turn all control knobs including sideburner (if featured) to the
OFF position.
3.
Turn LP tank OFF by turning hand-wheel clockwise to a
stop
.
4.
Remove the protective cap from LP tank valve. Always use
cap and strap supplied with valve.
Safety Relief Valve
5. Hold regulator and insert nipple into LP
tank valve. Hand-tighten the coupling
nut, holding regulator in a straight line
with LP tank valve to as not to cross-
thread the connection.
Nipple has to be centered
into the LP tank valve.
OPD Hand Wheel
Type 1 outlet with
thread on outside
Strap and Cap
Do not use a POL transport plug
(plastic part with external threads)!
It will defeat the safety feature of
the valve.
full

Advertisement

Table of Contents
loading

Table of Contents