Blacklevel - Toshiba teli BG030 Instruction Manual

BlackLevel

This section describes BlackLevel control of AnalogControl category for the BG series.
This control adjusts the black level of the image. It is adjustable from -5% to +25% as white saturation level
is 100%. However, when BlackLevel is lower than 0[%], the image level may not be saturated.
● Registers
Register
BlackLevelSelector
BlackLevel
● Setting
- Set Black Level
Set the following value to "BlackLevel" register. Setting value is Float type.
● Note
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
255(@8bit)
Black
Level
Visibility Access
Beginner R Returns the luminance component of Black Level setting.
Beginner R/W Sets the absolute Black Level.
BlackLevel
Minimum
Maximum
* initial factory setting = 0.00[%]
0 CCD
saturation level
Fig. Black Level
setting value
-5.00[%]
+25.00[%]
55 / 69
Description
http://www.toshiba-teli.co.jp/index.htm
D4211908D