Toshiba teli BG030 Instruction Manual page 40

● Registers
Register
TestImageSelector Beginner
● Setting
- Select a test pattern output
Set the following value to "TestImageSelector" register. Setting value is Enumeration type.
The camera generates a test pattern.
● Note
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
Visibility Access
R/W Selects a test pattern.
setting value
Off (*)
Black
White
BrightGrey
DarkGrey
GreyHorizontalRamp
Description
function
Test pattern disable(Normal data output)
All pixel = 0 LSB
All pixel = 255 @Mono8
All pixel = 170 @Mono8
All pixel = 85 @Mono8
Horizontal Ramp
* initial factory setting
39 / 69
D4211908D
http://www.toshiba-teli.co.jp/index.htm