Download  Print this page

Advertisement

2
Be sure to install this unit in the dashboard of
the car for safety. For installation and
connections, see the supplied installation!
connections manual.
Warning
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules
and RSS-Gen of IC Rules.
These limits are designed to provide reasonable
protection against hanuful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and recei ver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transluitter.
This equipment complies with FCC and IC
radiation exposure limits set forth for
uncontrolled equipment and meets the FCC
radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-I 02 of the
IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy
that it deemed to comply without maximum
permissive exposure evaluation (MPE). But it
is desirable that it should be installed and
operated with at least 20 cm and more between
the radiator and person's body (excluding
extremities: hands, wrists, feet and ankles).
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
CAUTION
The usc of optical instruments with this product
will increase eye hazard.
For the state of california, USA only
Perchlorate Material- special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate
•••••:®MP
Manufactured under license
. . . . . .
from BBE Sound, Inc.
I:>
I c; I,...A.. L
Licensed by BBE Sound, Inc.
under one or more of the following US patents:
5510752,5736897. BBE and BBE symbol are
registered trademarks of BBE Sound, Inc.
BBE MP (Minimized Polynomial Non-Linear
Saturation) Process improves digitally
compressed sound, such as MP3, by restoring
and enhancing the hanllonics lost through
compression. BBE MP works by re-generating
hanuonics from the source material, effectively
recovering warmth, details and nuance.
The "HD Radio Ready" logo indicates that this
product will control a Sony HD Radio™ tuner
(sold separately).
For HD Radio™ tuner operation, please refer to
the HD Radio
I'M
tuner Operating Instructions.
The HD Radio Ready logo is a registered
trademark of iBiquity.
HD Radio™ is a trademark of iBiquity Digital
Corp.
Warning if your car's ignition has no
ACC position
After turning the ignition off, be sure to press
and hold
(OFF)
on the unit until the display
disappears.
Otherwise, the display does not tum off and
this causes battery drain.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: