Data Display - Motorola GM1280 User Manual

DATA DISPLAY

This feature allows you to switch on and off the
data display. This is important if the radio is
being used with external data equipment
(DTE) supported via MAP 27, to prevent loss
of data messages. Refer to Special Calls -
Short Data Messages for a detailed description
of this feature.
You can switch On or Off the Data Display by
using a pre-programmed Data Display button
when the radio is in the IDLE STATE, or using
the keypad or via the menu.
Using the Data Display Button
1. Data Display
Press the
the Data Display, when the feature enable alert
will sound.
Data Display
2. Press the
off Data Display when the feature disable alert
will sound.
Using the Keypad:
Enter *23000# to turn OFF the
1.
incoming short data display.
Enter *23001# to turn ON the
2.
incoming short data display.
button to switch on
button again to switch
Using the Menu
1 Ensure radio is in IDLE STATE.
c
2
to enter Menu Mode.
+ e
3
or until:
c
4
to select
+ e
5
or until:
c
6
to select
Display shows
current status e.g. :
+ e
7
or until:
c
8
to select
Display shows:
(for 2 seconds)
9
Radio exits menu and returns to IDLE STATE
Settings
Settings
Data Display
Data Display
Off
On
On
Selected
English
55