Installing Your Microwave - Focal Point VT-25UG16-1 Owner's Instructions Manual

4.0 SAFETY PRECAUTIONS - CONTINUED
9. Be careful not to damage the power cable.
• Do not immerse the power cable or plug in water and keep the power cable away from heated surfaces.
• Do not operate this appliance if it has a damaged power cable or plug.
10. Stand at arm's length from the oven when opening the door.
Reason:The hot air or steam released may cause scalding.
11. Keep the inside of the oven clean.
Reason: Food particles or spattered oils stuck to the oven walls or floor can cause paint damage and reduce the efficiency of the oven.
Important Safety Instructions
During cooking, you should look into the oven from time to time when food is being heated or cooked in disposable containers of plastic,
paper or other combustible materials.
Important
Young children should NEVER be allowed to use or play with the microwave oven. Nor should they be left unattended near the microwave
oven when it is in use. Items of interest to children should not be stored or hidden just above the oven.

5.0 INSTALLING YOUR MICROWAVE

1) The position of the oven shall be such that it is far from the TV, Radio or arial as picture disturbance or noise may occur.
2) The appliance must be positioned so that the plug is accessible.
3) This appliance is designed to be integrated into a ventilated cabinet to the following specification.
• Minimum cabinet depth of 550mm
• Cabinet microwave shelf be between 18 and 20mm.
Installation
a) Fix top air guide onto outer microwave housing and secure outer baffle with
self locking screws. As shown in figure 7.
b) Secure fixing brackets onto each side of the microwave housing. As shown in
figure 8.
Self-lock screw M4X10(6PCS)
7
GB IE
Top air guide
Outer-back baffle
Fixing bracket
Self locking screws
M4X10 (12PCS)
©
2013 Focal Point Fires plc.