Get Started - AEG MOBILE M400 User Manual

10
5

GET STARTED

5.1 Install SIM card and battery
For availability information on using SIM card services, contact your SIM
card provider.
Note:
• Keep all SIM cards out of the reach of the children.
• Please do not touch the metal area to avoid losing and breaking the
information in the SIM card.
5.1.1 Remove battery
• Long press the End Key to power off if your phone is powered on.
• Remove the back cover.
• Take out battery: face the backside of the phone, take out the battery
just by lifting it up at the bottom side.
5.1.2 Install SIM card
When the phone is powered off and battery is removed.
Slide the SIM card gently into the SIM card holder from the topside with
the cut corner of the SIM top left and push it down until it is fixed.
5.1.3 Installing the battery
• Insert the top of the battery by aligning the gold contacts in the battery
compartment with the battery contacts of the battery.
• Press down the bottom side of the battery into the battery compartment.
5.2 Charging
Use only original charger or authorized one for this phone.
You can charge using the travel charger or desktop cradle charger.
• Plug the micro-USB into the phone on the side and charging starts.
• Plug the micro-USB into the cradle base, put the phone on the cradle,
and charging starts.
>When charging starts, the stripe of battery strength on the right corner
of the screen starts to roll. The battery is fully charged when the stripe
becomes full and stops rolling.
5.3 Power on/off
• Long press end key to power on.
• Long press end key again to power off.