Connecting To A Computer; System Requirements - Sony S-Frame DPF-V900 Operating Instructions Manual

External
memory or
other external
device
-
• When using a commercially available USB cable,
use an A-Type USB cable that is less than 3 meters
long.
• Do not disconnect the USB cable or tum the photo
frame and external device off while the access
lamp on the external device is flashing. Doing so
may damage the data in the external device. Sony
assumes no responsibility for any damage or loss
of data.
• A USB hub or USB device with a built-in USB hub
may not work properly.
• The photo frame cannot use data that has been
encrypted or compressed using, for instance,
fingerprint authentication or a password.
Connecti.ng to a
computer
You can connect to a computer to view and
copy images of the internal memory of the
photo frame to the computer, and copy images
of the computer to the photo frame.
To connect a computer to use the picture frame,
your computer must satisfy the following
recommended system requirements.
• Windows
Recommended OS: Microsoft Windows Vista,
Windows XP Service Pack 2 or Windows 2000
Professional Service Pack 4
(pre-installed at the time of shipment from the
factory)
Port: USB port
• Macintosh
Recommended OS: Mac OS X
(lOA)
or later
(pre-installed at the time of shipment from the
factory)
Port: USB port
..
• If multiple USB devices are connected to a
computer or if a hub is used, a problem may occur.
In such a case, simplify the connections.
• You cannot operate the photo frame from another
USB device being used simultaneously.
• Do not disconnect the USB cable during data
communication.
• Operation with all computers that satisfy the
recommended system requirements is not
guaranteed.
• The photo frame has been demonstrated as
operable with connecting to PC or Sony digital
photo printer. When other devices are connected to
the photo frame, these devices may not recognize
the internal memory of the photo frame.
Continued
I