Positioning Of Adjustable Paper Guide - Mitsubishi Electric CP-D70DW Operation Manual

BEFORE OPERATION

POSITIONING OF ADJUSTABLE PAPER GUIDE

Adjust the paper guides according to the paper width.
Adjustable paper guides
For 9x13(3.5x5") or 13x18(5x7")
size paper (5"-width)
HOW TO SET THE ADJUSTABLE PAPER GUIDES
Pinch the tab on the adjustable paper guide and slide it right or left.
Slide the paper guide until it stops. The paper guide will snap into place.
Slide other paper guide in the similar way.
Make sure to set the adjustable paper guides to the size of the paper width. When they are not positioned properly, a
malfunction such as paper jam and misaligned printing position may occur.
When you use 10x15 (4x6"), 15x20 (6x8") or 15x23 (6x9") size paper (having width of 152 mm) after using 9x13 (3.5x5") or
13x18 (5x7") size paper (having width of 127 mm) for a long time or printing such paper in large quantities, thermal head
cleaning may be required. For cleaning of the thermal head, see page 21.
In some cases, the print quality is not improved though thermal head cleaning is carried out. In this case, replacement of
the thermal head is required. For detail, consult your dealer.
For 10x15(4x6"), 15x20(6x8")
or 15x23(6x9") size paper
(6"-width)
Tab
NOTE
NOTE
10