Switching The Dishwasher Off; Changing The Programme; Interrupting The Programme; Intensive Drying - Siemens 1G03QB 630G Instructions For Use Manual

Table of Contents

Advertisement

en

Switching the dishwasher OFF

Several minutes after the programme has
ended:
Set the main switch
Turn the water tap off.
(Does not apply when Aqua-Stop unit
has been fitted)
Remove dishes, etc. when they have
cooled down.

Interrupting the programme

Set main switch
Indicator lights extinguish. The
programme is retained in the
dishwasher memory.
If the hot water was switched ON or the
appliance has already heated up and then
the appliance door opened, leave the door
ajar for several minutes and then close.
Otherwise, the appliance door may fly
open due to expansion.
In order to continue with the stored
programme, set the main switch to ON
again.
Cancel programme (Reset)
Only when the master switch is ON.
Press the A and C buttons
simultaneously, and hold them pressed
for approx. 3 seconds.
The numerical display shows
The programme continues for approx.
1 min.
When it has ended, set the main switch
to OFF.
1
To restart the dishwasher, set main switch
to ON again and select desired
1
programme.
20
to OFF.
1
to OFF.
1
.

Changing the programme

It is possible to change the programme
within 2 minutes after you have switched
the dishwasher on.
Should it be necessary to change the
programme after this period, the
programme cycle that has already been
begun (e.g. washing) will be completed
first of all.
The new remaining time displayed is the
sum of the remaining time from the
preceding programme cycle and the
remaining time attributable to the new
programme that has been selected.

Intensive drying

If the "Intensive drying" function is
activated, the temperature of the final rinse
is increased in all programmes and you
will therefore receive an improved drying
result. (Note the higher temperature may
not be suitable for fragile utensils.)
Hold down the programme button A
and switch on the main switch.
Release both buttons.
The digital display
or
(off).
To change the setting, press the
programme button A .
Switch off the main switch
the setting is stored.
flashes
(on)
3
;
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents