Light Timer; Light Hi/Lo/Off; More/Less; Custom Program - Kenmore 592.85610-0 Use And Care Manual

LIGHT TIMER

You can set the LIGHT to turn on and off automatically
at any time. The light comes on at the same time every
day until reset.
Example: Turn on 2:00 AM, turn off 7:00 PM.
12 hour clock mode.
24 hour clock mode.
To cancel the light timer.
NOTE: If you want to cancel the LIGHT TIMER in
operation, touch the 0 pad.
CANADA-MH5 DE68-03143S_EN.indd 13
OPERATION
1. Touch TIMER pad.
2. Enter the time you
want the LIGHT to turn
on.
3. Touch ENTER/START
pad.
4. Touch 1 for AM.
5. Touch ENTER/START
pad.
6. Enter the time you want
the LIGHT to turn off.
7. Touch ENTER/START
pad.
8. Touch 2 for PM.
9. Touch ENTER/START
pad.
1. Touch TIMER pad.
2. Enter the time you
want the LIGHT to turn
on.
3. Touch ENTER/START
pad.
4. Enter the time you
want the LIGHT to turn
off.
5. Touch ENTER/START
pad.
1. Touch TIMER pad.
2. Touch 0 pad.
- 13 -

LIGHT HI/LO/OFF

Touch LIGHT HI/LO/OFF pad
once for bright light, twice for
night light, or three times to turn
the light off.

MORE/LESS

The More(9)/Less(1) pads allow you to adjust pre-set
cooking times.
They only work in the Sensor Reheat, Sensor
Cooking(except Beverage), Add 30 sec, Custom Cook
or Time Cook modes. Use the More(9)/Less(1) pads
only after you have already begun cooking with one of
these procedures.
Follow these instructions to add or reduce cooking
times for an automatic cooking procedure;
Touch the More(9) pad to add
time.
Touch the Less(1) pad to
reduce
time.

CUSTOM PROGRAM

CUSTOM PROGRAM lets you recall one cooking
instruction previously placed in memory and begin
cooking immediately.
Example: To cook for 2 minutes at 70% power.
Example: To recall the custom program.
When the cook time is over, you will hear four beeps
and END will display.
1. Touch CUSTOM
PROGRAM pad.
2. Enter the cook time.
3. Touch POWER LEVEL
pad.
4. Enter the power level.
5. Touch ENTER/START
pad.
1. Touch CUSTOM
PROGRAM pad.
2. Touch ENTER/START
pad.
2007-08-30 4:37:16