Download Print this page

Maintenance And Care; Overall Condition Of The Machine; Special Salt And Rinse Aid; Filters - Siemens Dishwasher Operating Instructions Manual

Dishwasher
Hide thumbs

Advertisement

Maintenance and care

A regular inspection and maintenance of
your machine will help to prevent faults.
This saves time and prevents problems.

Overall condition of the machine

– Check spray arm for grease and
limescale deposits.
If you find such deposits:
– Fill detergent dispenser with detergent.
Start the appliance without utensils in
the programme with the highest rinsing
temperature.
Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.
– Regularly clean door seal with a damp
cloth.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water and a
little washing up liquid are adequate. Do
not use sponges with a rough surface or
abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths or
wash them out thoroughly several times
before using for the first time.
ã=
Warning
Never use other chlorinated household
detergents! Health hazard!

Special salt and rinse aid

– Check the refill indicators P and
X. If required, refill salt and/or rinse
aid.

Filters

The filters 1J keep large foreign
objects in the rinsing water away from
the pump. These foreign objects may
occasionally block the filters.
– After each wash cycle check the filters
for residue and clean if required.
– After unscrewing the coarse microfilter,
you can take out the filter group.
&RDUVH PLFURILOWHU
– Remove any residue and clean filters
under running water.
– Re-install filter system in reverse
sequence and ensure that the arrow
marks are opposite each other after
closing the filter system.
en
17

Advertisement

loading