ELECTRICAL CONNECTION: ..................5 USING FOR THE 1st TIME: ...................5 RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE......5 JUICE EXTRACTOR model # 28 & # 58 ................6 USING THE APPLIANCE ....................7 USING: ...........................7 HOW TO STOP THE MACHINE ..................7 Cleaning: ........................7...
SANTOS : Instruction and maintenance manual “CE” COMPLIANCE DECLARATION THE MANUFACTURER: SANTOS SAS - 140-150, Av. Roger SALENGRO 69120 VAULX-EN-VELIN (LYON) FRANCE HEREBY DECLARES THAT THE MACHINE DESIGNATED ON THE IDENTIFICATION PLATE AFFIXED: • UNDER THE APPLIANCE, • ON THE WARRANTY CERTIFICATE ON THE LAST PAGE OF THIS MANUAL, COMPLIES WITH THE PROVISIONS OF THE "machines"...
The machine's 4 feet must always be resting on that surface. The machine's motor spindle must always be vertical relative to that surface. • Use of spare parts other than certified original SANTOS parts is prohibited. 98158 US 2.0 - 05 2007...
3. To be able to remove the cover, turn then lift the cover (2), Fig.3 4. Model # 28 : Using the basket locking spanner (18), unscrew the basket fixing screw (15) completely, while holding the basket immobile with the other hand.
The damaging materials should be eliminated or recycled according to the regulations in force. JUICE EXTRACTOR model # 28 & # 58 • Robust and very well-constructed (components made of cast aluminum, engineered plastic and 18/10 stainless steel plate), this juice extractor is...
(7) Fig.8 2. Model # 28 : Place the basket assembly (5) in the bowl (4), making sure it is correctly located on the motor shaft (8). The drive pin (19) needs to be in the...
Correct the fault, reset the circuit breaker and re-start the machine. If the problem persists, switch off the power supply to the machine (unplug the cord from the mains socket (10)) and call in the maintenance service or contact a SANTOS approved dealer.
If the problem persists, switch off the power supply to the machine (unplug the cord from the mains socket (10)) and call in the maintenance service or contact a SANTOS approved dealer. SAFE ACCESS TO THE TOOLS: The juice extractor can only be started if the cover and bowl are positioned correctly on the bowl centering device (7) and the clamping handle (1) is locked.
SANTOS : Instruction and maintenance manual view at the end of this manual, or that can be downloaded from our Web site www.santos.fr). For the machine to operate properly, it is recommended that a check is also made that the locking membrane (21) is in good condition, in particular the absence of any signs of tearing.
SANTOS : Instruction and maintenance manual FAULT FINDING First identify exactly why the machine stopped. The machine will not start: • Check: the mains power supply and the condition of the power supply cord, • Check: the position of the juice bowl (4) on the bowl centering device (7), the position of the cover (2) on the juice bowl, and the locking of the clamping handle (1).
3 secs max 3 secs max Noise LAeq, dB Measured at 3000 rpm ref 20 µ Dimensions and weight Height (mm) Model #28 / Model #58 Width (mm) Depth (mm) Net weight (kg) Packaged weight (kg) 26.7 Container capacity (Liters)
SANTOS : Instruction and maintenance manual ELECTRICAL WIRING DIAGRAMS Electrical wiring diagram 110 - 120V 50/60Hz Brown White Brown Black Blue White Starter relay U > Black Black Capacitor White Black White White Bowl White tightening White safety device Black...
SANTOS : Instruction and maintenance manual Electrical wiring diagram 220-240V 50/60Hz White White Yellow / White Red / White Capacitor Blue / White Blue Starter relay Black White Violet White Bowl White tightening safety White device White White White Black...
Page 15
SANTOS : Instruction and maintenance manual TABLEAU DE TRADUCTION DES ELEMENTS DE LA MACHINE 1 Clamping handle Poignée de serrage 2 Cover Couvercle 3 Plunger Poussoir 4 Bowl Cuve 5 Centrifugation basket Panier centrifugation 6 Pulp container Conteneur à pulpe...
SANTOS : Instruction and maintenance manual WARRANTY CERTIFICATE WARRANTY This appliance is guaranteed for twelve months from the date of manufacture appearing on the identification plate. The guarantee is strictly limited to the free replacement of any original part acknowledged by us as being defective as a result of a fault or a manufacturing defect and identified as belonging to the appliance in question.
Need help?
Do you have a question about the 28 and is the answer not in the manual?
Questions and answers