Table of Contents
Advertisement
Using the Personal LCD Display
Before you start...
Be sure to follow the procedures in "Connecting the Personal LCD Display" (page 8) and "Wearing the
Personal LCD Display" (page 10).
1
Turn on the Personal LCD Display using the POWER ON/OFF
switch.
The POWER lamp lights up green.
2
Start playback on the video equipment connected to the Personal
LCD Display.
3
Adjust the volume by turning the VOL control.
When you set AVLS (Auto Volume Limiter System) in the MENU to on , you cannot turn up the
volume beyond the defined limit (see pages 14-16).
Display unit
After you finish using the
Personal LCD Display
Take off the Personal LCD Display, and turn off
the power.
Note on the LCDs
The LCD screen is made with high-precision
technology. However, black points or bright
points of light (red, blue, or green) may appear
constantly on the LCD screen. This is not a
malfunction.
(Effective dots: more than 99.99%)
12
-US
POWER
ON / OFF
louder
lower
VOLUME
Checking the display
indication
Press the SEL/PUSH EXEC (PUSH DISPLAY)
jog dial while the picture is displayed. The
display indication appears on the screen for five
minutes.
To turn off the indication immediately, press the
jog dial again.
MEGA BASS
SURROUND
AVLS
MEGA BASS
(page 15)
SURROUND
(page 15)
AVLS
(page 16)
Advertisement
Table of Contents
