Customizing the settings
Using Setup items
You can change the default settings using the Setup screen.
Press MENU to display the menu.
Tilt the multi-selector to v/V to select
Tilt to v/V/b/B to select the item you want to set.
The selected item is highlighted.
Tilt to B to enter the setting.
You can also enter the setting by pressing the multi-selector.
To turn off the Setup screen, press MENU.
To return to the menu from the Setup screen, tilt to b repeatedly.
To cancel the setting change
Select [Cancel] if it appears, then press the multi-selector. If it does not appear, select the
previous setting again.
• This setting is maintained even when the power is turned off.