Eagle FishEasy 350c Installation & Operation Instructions page 31

Fish-finding sonar
Table of Contents

Advertisement

Bolt
Washer
Portable transducer assembly: rear view (left) and side view (right).
5. Moisten the cup and press it onto the hull as firmly as possible. Tie
the nylon cord to the boat and route the transducer cable to the sonar
unit. Your portable sonar is now ready for use.
Portable transducer installed on boat transom.
NOTE:
For optimum operation, the portable transducer should be adjusted
so it is parallel to the ground.
Tie nylon
cord here
Suction
Nut
Washer
Transducer
Suction
cup
Hull
cup
29
Screw
Bracket
Transducer

Advertisement

Table of Contents
loading

Table of Contents