Page of 168
Download Print This PagePrint Bookmark Comment

Eagle FishEasy 350c Installation & Operation Instructions Page 18

Hide thumbs

Advertisement

Transducer aimed
too far back
Full fish arch
Transducer angles and their effects on fish arches.
If the arch slopes up – but not back down – then the front of the trans-
ducer is too high and needs to be lowered. If only the back half of the
arch is printed, then the nose of the transducer is angled too far down
and needs to be raised.
NOTE:
Periodically wash the transducer's face with soap and water to remove
any oil film. Oil and dirt on the face will reduce the sensitivity or may
even prevent operation.
Partial fish arches
Proper transducer angle
16
Transducer aimed
too far forward

Advertisement

   Related Manuals for Eagle FishEasy 350c

Comments to this Manuals

Symbols: 0
Latest comments: