Instruction Codes - Mitsubishi Electric FR-A8NC Instruction Manual

7.2.3

Instruction codes

 Instruction code definition
Set the instruction code using a remote register (RWw) (Refer to
The definition read by the instruction code is stored in the remote register (RWr). (Refer to
Item
Operation mode
Output
frequency/
speed ,
 
Output current
Monitor
Output voltage
Special monitor
Special monitor
selection No.
66
DETAILS OF INPUT AND OUTPUT SIGNALS
Read/ Instruction
write code
H0000: Network operation mode
H0001: External operation mode, External JOG operation mode
Read H7B
H0002: PU operation mode, External/PU combined operation mode 1 and 2, PUJOG
operation mode
H0000: Network operation mode
Write HFB H0001: External operation mode
H0002: PU operation mode (Pr.79 = "6")
H0000 to HFFFF
Output frequency: Increments 0.01 Hz
Read H6F
(The display can be changed to the rotations per minute using Pr.37, Pr.144
and Pr.811. (Refer to the Instruction Manual (Detailed) of the inverter.))
H0000 to HFFFF
Read H70
Output current (hexadecimal): Increments 0.01 A / 0.1 A
H0000 to HFFFF
Read H71
Output voltage (hexadecimal): Increments 0.1 V
Read H72 H0000 to HFFFF: Check the data of the monitor selected by the instruction code HF3.
Read H73
H01 to HFF: Monitor selection data
Refer to monitor code. (Refer to
Write HF3

page 59.)
page
Description
page 70.)
62.)
