Messages - Panasonic SC-XH380 Operating Instructions Manual

Picture
The picture on the TV is not displayed correctly or
disappears.
≥ The unit and TV are using different video systems.
For the Middle East and South Africa
Use a multi-system or PAL TV.
For Southeast Asia
Use a multi-system or NTSC TV.
≥ The system used on the disc does not match your TV.
– Change the "TV System" settings to match your TV. (
(Depending on the PAL video on the disc, the image may not be
displayed correctly on an NTSC TV.)
≥ Ensure that the unit is connected directly to the TV, and is not
connected through a VCR. (
≥ Mobile telephone chargers can cause some disturbance.
≥ If you are using an indoor TV antenna, change to an outdoor antenna.
≥ The TV antenna wire is too close to the unit. Move it away from the unit.
≥ Reduce the number of connected HDMI devices.
≥ When using the HDMI AV OUT terminal, ensure that an incompatible
video output with the connected TV is not selected. Set the "Video
Resolution" in Video menu to "480p/576p". (
≥ Video images converted to 1920k1080 resolution may look different
from the true native 1080p full-HD sources. This is not a malfunction of
the main unit.
Picture size does not fit the screen.
≥ Change "TV Aspect" in the Video menu. (
≥ Use the TV to change the aspect.
≥ Change the zoom setting. ("Zoom" in Menu 2) (
≥ [JPEG] This is normal during HD JPEG playback. Set "HD JPEG Mode"
to "Off" if you want to perform zoom function. (
Menu is not displayed correctly.
Restore the zoom ratio to "Normal". ("Zoom" in Menu 2) (
Display is distorted.
[JPEG] This is normal when the display switches to/from HD JPEG
playback.
USB
The USB drive or its contents cannot be read.
≥ The USB drive format or its contents is/are not compatible with the
system. ( 16)
≥ The USB host function of this product may not work with some USB
devices.
≥ USB devices with storage capacity of more than 32 GB may not work in
some instances.
Slow operation of the USB device.
Large file size or high memory USB device takes longer time to read and
display on the TV.
HDMI progressive video
There is ghosting when HDMI progressive output is on.
This problem is caused by the editing method or material used on
DVD-Video, but should be corrected if you use interlaced output. When
using the HDMI AV OUT terminal, set "Video Resolution" in Video menu
to "480i/576i". Or, disable the HDMI connection and use the other video
connection. ( 8, 17)
Radio
Distorted sound or noise is heard.
Adjust the position of the FM antenna.
A beat sound is heard.
Try to keep a certain amount of distance between the antenna and the TV.
If noise is excessive.
Change the audio to be output as monaural.
Press and hold [PLAY MODE]9 to select "MONO".
The sound becomes monaural.
≥ To cancel the mode, press and hold the button again until "AUTO ST" is
displayed. (The mode is also cancelled when you change the
frequency.)
In normal circumstances, select "AUTO ST".
22
17)
8)
17)
17)
14)
17)
14)

Messages

The following messages or service numbers may appear on the TV or
unit's display.
TV displays
"/"
The operation is prohibited by the unit or disc.
"/ Incorrect Disc Region"
Only DVD-Video discs that include or have the same region number as
the one on the rear panel of this unit can be played. (
Unit displays
"NO PLAY"
≥ You inserted a disc the unit cannot play; insert one it can. (
≥ You inserted a blank disc.
≥ You inserted a disc that has not been finalised.
"NO DISC"
≥ You have not inserted a disc; insert one.
≥ You have not inserted the disc correctly; insert it correctly. (
"USB OVER CURRENT ERROR"
The USB device is drawing too much power. Switch to "DVD/CD" mode,
remove the USB and turn the unit off.
"F61"
Check and correct the speaker cable connections. If this does not fix the
problem, consult the dealer. (
"F76"
There is a power supply problem. Consult the dealer.
"DVD U11"
Disc may be dirty. Wipe it clean.
"SET OK"
"SET OK" is displayed when the stations are set, and the radio tunes to
the last preset station.
"ERROR"
≥ Incorrect operation performed. Read the instructions and try again.
≥ "ERROR" is displayed when automatic presetting is unsuccessful.
Preset the stations manually.
"TUNED/STEREO"
Displayed when receiving stereo broadcasting.
"TUNED"
Displayed when receiving monaural broadcasting or monaural sound is
selected.
"DVD H∑∑"
"DVD F∑∑∑"
∑ stands for a number.
≥ Trouble may have occurred. The numbers following "H" and "F" depend
on the status of the unit. Turn the unit off and then back on.
Alternatively, turn the unit off, disconnect the AC mains lead, and then
reconnect it.
≥ If the service numbers fail to clear, note the service number and contact
a qualified service person.
"U70∑"
∑ stands for a number. (The actual number following "U70" will depend on
the state of the main unit.)
≥ The HDMI connection acts unusually.
– The connected equipment is not HDMI-compatible.
– Use the High Speed HDMI Cables.
– The HDMI cable is too long.
– The HDMI cable is damaged.
"REMOTE 1" or "REMOTE 2"
Match the modes on the main unit and remote control. Depending on the
number being displayed ("1" or "2"), press and hold [OK]8 and the
corresponding numbered button ([1] or [2]) for at least 2 seconds. (
Cover page)
19)
7)
12)
4)