Fujitsu ART90EL Operating Manual page 9

To Change Selected Time Settings
Press the START/STOP button to stop the air conditioner, and then proceed as fol-
lows.
1 Carry out steps 1 to 3 of the "Setting Up the Weekly
Timer Operation" procedure to select the day you want
to edit.
2 Press the SET button to select the time that you want
to change.
The selected setting flashes on the display. Each press moves you to the
next setting for the selected day, as follows.
WEEKLY 1
c
ON
3 Press the SET TIME button to change the time setting.
4 Press the SET button.
The new setting overwrites the previous setting.
5 Once the setting has been canceled, hold down the SET
button for 3 seconds.
The WEEKLY display flashes briefly, and then the clock display appears.
NOTES:
In the following cases, cancel the set time prior to making the required amendments.
(1) If you want to change the ON time to a time that is later than the currently set OFF time.
Change
(2) If the change would cause a temporary overlap between the first and second ON/OFF time spans.
ON
Change
WEEKLY 1 WEEKLY 2
c c
OFF ON
ON
WEEKLY 1
OFF
WEEKLY 1
ON
WEEKLY 1
WEEKLY 2
c
OFF
OFF
ON
WEEKLY 1
ON OFF
WEEKLY 2
Temporary overlap
OFF
ON
ON
TIMER
DAY
WEEKLY
OFF
1 2
TIMER SET TIME TEMP./DAY
MODE CONTROL
CLOCK ADJUST
ZONE ENERGY SAVE
SET DAY OFF
Example: Changing the "WEEKLY 2"
ON setting for day 5 (Friday)
from 14:00 to 15:30
ON
TIMER
DAY
WEEKLY
OFF
1 2
TIMER SET TIME TEMP./DAY
MODE CONTROL
CLOCK ADJUST
ZONE ENERGY SAVE
3 SET DAY OFF
Time
OFF
Time
Time
OFF
WEEKLY 2
Time
AUTO AUTO
DEFROST TEST
FAN
MASTER
CONTROL
START/STOP
2
AUTO AUTO
DEFROST TEST
FAN
MASTER
CONTROL
START/STOP
4
8