Portion Size; Changing Portion Size While Making A Drink - Miele Freestanding coffee machine Operating Instructions Manual

The flavour of the coffee produced
depends not just on the type of coffee
used, but also on the amount of water
used.
You can programme the amount of
water to suit the size of your cups and
the type of coffee you are using.
For coffee drinks that use milk you can
also set the amount of milk or milk froth
to be dispensed. You can also set the
portion sizes for hot milk and milk froth
alone.
Each type of drink has a maximum
portion size that can be programmed
into the machine. The coffee machine
halts preparation of the coffee once this
portion size has been reached. The
maximum possible portion size for this
type of drink is then saved in the
machine.
The changed portion size is always
saved in the current User profile. The
name of the current profile appears in
the top left-hand side of the display.
There are two ways to start
programming the portion amount:
– Either by touching the drink sensor
when you are making a coffee, or
– by selecting "Portion size" from the
"Parameters" menu.
If the water container becomes
empty whilst making a drink, the
machine will stop programming the
portion size. The portion size will not
be saved.
Tip: To cancel changing the portion
size, touch the drinks sensor which is lit
up, or touch x for "Further
programmes".
Changing portion size while
making a drink
Portion sizes for Espresso . and
Coffee /
^ Place the desired cup under the
central spout.
^ Touch . or / until "Change" appears
in the display.
The selected drink will now be made.
You can set the amount as soon as
"Save" appears in the display.
^ When the cup is filled up to the level
you want, touch OK.
The portion size programmed in will
now be dispensed every time that
particular drink is selected.

Portion size

33