Advertisement
EUROLIVE
B215XL/B212XL
B215XL-WH
B212XL-WH
Get on the stick...or get on down
The B212XL and B215XL are perfect either
as part of a PA system or as onstage monitors.
If the situation calls for a PA, mount the
speakers on stands via the 35mm pole socket.
From there, send a line from the MAIN OUT of
a mixer (such as a XENYX 1202FX) to a power
amplifier (like the EUROPOWER EP2000).
Finally, attach a B212XL or B215XL to each of
the amp's outputs. These loudspeakers have
inputs for both professional speaker cable and
¼" cable. Because these loudspeakers have two
parallel inputs, you can connect up to two of
them to any channel on a power amp.
But these loudspeakers don't have to be
confined to an upright position. Just lay them on
their sides for use as a floor monitor. You'll find
that they tilt to the ideal angle for onstage
monitor wedge applications.
Choose white, black, on or off the wall...
You asked for it, and now we're proud to
offer these amazing loudspeakers in black or
white. We now also make swiveling wall-mount
brackets for the B212XL and B215XL. That means
they're ready to fit even more comfortably into
a venue's color scheme and layout (WB212 and
WB215 for black brackets or WB212-WH and
WB215-WH for white). No matter what your
sound or aesthetic needs may be, we make one
that's just right for you!
Ultra-wide
dispersion and
large format
exponential horn
Ergonomically
shaped carry
handles on
each side of
enclosure
12"/15" long-
excursion LF
transducer
provides deep
bass and
acoustic power
1 3/ ₈ " (35-mm)
pole socket
for use with
standard
speaker stands
B212XL
348.80 mm [13.7322]
272.00 mm [10.7086 in]
1.75" titanium
diaphragm
compression driver
for high-frequency
reproduction
Impact resistant,
molded enclosure
Large openings for
powerful low-end
reproduction
Rubber feet for
stacking enclosure
on structures or
subwoofers
Parallel ¼"
loudspeaker
inputs
Professional
speaker inputs
wired in parallel
B215XL
436.00 mm [17.1653 in]
336.00 mm [13.2283 in]
Page 3 of 4
Advertisement
