Advertisement
A N T . SWITCH IN
THIS POSITION.
LOOP
AM
ANT
ANT
OUTPUT: Two pin jacks are supplied on the back panel marked "Output." These jacks are in parallel.
The output is unbalanced low impedance. Interconnect between either of these jacks and the tuner input of
your preamplifier by means of the 6 foot shielded cable supplied with your tuner.
Plug the A. C. cable from the tuner into one of the auxiliary A. C. outlets on the back of the preampli-
fier.
TO LONG WIRE ANTENNA.
PHONO
INPUT
OUTPUTS
MULTIPLEX
—10—
OUTPUT
Advertisement
