Section 5-Wheelchair Operation; Operating The Wheelchair - Invacare Pronto M51 Base Owner's Operator And Maintenance Manual

SECTION 5—WHEELCHAIR
OPERATION
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Set-up of the Electronic Control Unit is to be performed only by a qualified techni-
cian. The final adjustments of the controller may affect other activities of the wheel-
chair. Damage to the equipment could occur under these circumstances.

Operating the Wheelchair

Turning the Power On/Off
NOTE: For this procedure, refer to FIGURE 5.1.
NOTE: MPJ+ Joystick available on Formula CG seating system only.
1. To turn the power On, perform one of the following steps:
JOYSTICK
MPJ+
SPJ+
2. Turning the power Off can be achieved by performing one of the following steps:
JOYSTICK
MPJ+
SPJ+
Part No. 1148076
WARNING
Move the On/Off switch Forward to the On position.
Press the On/Off button.
Move the On/Off switch Back to the Off position.
Press the On/Off button.
SPJ+ Joysticks
On/Off
Button
FIGURE 5.1 Turning the Power On/Off
SECTION 5—WHEELCHAIR OPERATION
ACTION
ACTION
MPJ+ Joystick (CG ONLY)
On/Off
Switch
29
Pronto
® ™
M51 Base with SureStep
®