Usb Playback - Sony DAV-DZ310 Operating Instructions Manual

USB playback

Symptom
A USB device does not start
playing from the beginning.
A USB device cannot be played. • USB devices formatted with file systems other than FAT12, FAT16, or FAT32
A file cannot be played.
A JPEG image file cannot be
viewed.
A video file cannot be played.
A WMA file cannot be played.
An AAC file cannot be played.
The titles of folders/files/file
names are not displayed
correctly.
File names are not displayed
properly.
It takes time until playback
starts.
A USB device which has been
used on another device does not
work.
74
GB
Problems and solutions
• While in stop mode, press x on the unit or the remote and then start playback
(page 36).
are unsupported.*
* This system supports FAT12, FAT16, and FAT32, but some USB devices
may not support all of these. For details, refer to the operating instructions of
the USB device or contact the manufacturer.
• If you use a partitioned USB device, only audio files on the first partition can
be played.
• The extension of the file name or file format is not correct. See "Playable Discs/
Files on a USB Device" (page 5).
• Check the [MEDIA] setting (page 35).
• The system can play to a depth of 8 folders only.
• Check that the number of folders is 200 or less.
• Check that the number of audio files/JPEG image files in the folder is 150 or
less.
• Files that are encrypted or protected by passwords, etc. cannot be played.
• The JPEG image file is larger than 3,072 (width) × 2,048 (height) pixels in
normal format, or more than 2,000,000 pixels in progressive format which is
mainly used on Internet Web sites.
• The video file is larger than 720 (width) × 576 (height).
• A WMA file that is in WMA DRM, WMA Lossless, or WMA PRO format
cannot be played.
• An AAC file that is in AAC DRM or AAC Lossless format cannot be played.
• The system can only display numbers and letters of the alphabet. Other
characters are displayed as [_].
• The character codes that can be displayed by this system are numbers and letters
of the alphabet only. Other characters are not displayed correctly.
• After the system reads all files on the USB device, playback may take more
time than usual if:
– there are many folders or files on the USB device.
– the folder or file organization structure is very complex.
– the memory capacity is very large.
– the file size is extremely large.
– the internal memory is fragmented.
• The system is playing an audio file in AAC format.
• It may be recorded in an unsupported format. If so, first take the precaution of
backing up important files on the USB device by copying them to your
computer hard disk. Next, format the USB device in FAT12, FAT16, or FAT32
format, and transfer the files to the USB device again.