Mendota DXV-60 Installation & Operating Instructions Manual page 30

COMPLETED LOGS AND COAL BED ASSEMBLY EVALUATION
See the picture, shown below. This picture shows the recommended log positions. Slight variations in the
position of each log is allowed. However, if any log position is significantly out of position in comparison
to the diagram below and if any flames are floating off the burner surface after 10 minutes of starting the
fireplace, turn off the fireplace and contact your installer or fireplace dealer. Have the Installer/Dealer
adjust the log positions and also conduct a thorough evaluation of the venting configuration to make cer-
tain that the venting configuration conforms to Mendota's venting requirements, listed in this Installa-
tion and Operations Manual.
29