ATTACHING THE AIR CLEANSING FILTERS
CAUTION
!
Cleaning and maintenance must be carried out only by qualiÀ ed service personal. Before cleaning,
stop operation and switch off the power supply.
1
Open the front panel.
●
Pull up the front panel by holding it at both sides
with both hands.
2
Remove the À lter.
●
Push upward to release the claws and pull out the
À lter.
3
Attaching the air cleansing À lters to the À lter.
●
Attach the air cleansing À lters to the frame by gently
compress its both sides and release after insertion
into À lter frame.
!
Do not bend the air cleansing
À lter as it may cause damage to
the structure.
4
Attach the À lters.
●
Attach the À lters by ensuring that the surface written
"FRONT" is facing front.
●
After attaching the À lters, push the front panel at
three arrow portion as shown in À gure and close it.
NOTE
●
In case of removing the air cleansing À lters, please follow the above procedures.
●
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air cleansing
À lters are used. So, set the fan speed to "HIGH" when using it in this condition.
●
Do not operate the air conditioner without À lter. Dust may enter the air conditioner and fault may
occur.
CAUTION
Claws
(4 places)
– 16 –