Upc E0 Number System; Upc E0 Addenda - Honeywell Hyperion 1300g User Manual

UPC E0 Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On

UPC E0 Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC E data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
6 - 31