Introduction; Intended Purpose; Equipment Components - Parkside IAN 75636 Operation Manual

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
W
Watts (Effective power)
n
Design no-load speed
0
V ~
Voltage
Ah
Amp (Battery capacity)
Nm
Newton metre (torque)
DC (current and voltage type)
Cordless drill PABS 18-Li B2
Introduction
Q
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use
are part of the product. They contain important in-
formation concerning safety, use and disposal. Be-
fore using the product, please familiarise yourself
with all of the safety information and instructions
for use. Only use the unit as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.
6 GB
Safety class II
Drill chuck, Made In Germany
Spindle lock
Drill setting (torque preselect)
Wear ear protection.
Keep children away from electrical
power tools!
For indoor use only!
Check that the device, mains lead
and plug are in good condition!
Dispose packaging and appliance in
an environmentally-friendly way!
Do not dispose of rechargeable
batteries with your household refuse!

Intended purpose

Q
This appliance is designed for drilling and screwing
into wood, plastic and metal. Use the appliance only
as described and only for the purposes indicated.
Any other uses, and modifications to the appliance,
are deemed to be improper usage and may result
in serious physical injury. The manufacturer accepts
no responsibility for damage(s) resulting from
improper usage. The appliance is not intended for
commercial use.

Equipment Components

Q
Gear selector switch
1
Direction of rotation switch / lock
2
ON / OFF Switch / R.P.M. regulator
3
Bit holder
4
Belt clip
5