Download  Print this page

Burner Bracket Removal; Spark Module Removal - GE JGP628 Technical Service Manual

36/30-inch cooktop revitalization gas model
Hide thumbs

Advertisement

Table of Contents

Burner Bracket Removal

1. Remove the burners and top (see Burner and
Top Removal).
2. Remove the insulation blanket.
Igniter
Igniter
Wire
Wire
Retainer
Retainer
3. Remove the graphite gasket ring (glasstop
models only).
4. Compress the legs of the burner support and
lift up to remove.
1/2-in. Nut
1/2-in. Nut
5. Remove the 1/2-in. nut on the gas line to the
burner bracket.
6. Remove 2 screws (1/4-in.) and the igniter wire
from the burner bracket.
Note: When installing, be sure the igniter wire is
placed through the hole with the retainer clip.
Graphite Gasket
Graphite Gasket
Burner Support
Burner Support
Burner Support
GEA00773
1/4-in. Screw
1/4-in. Screw
GEA00774
– 17 –

Spark Module Removal

1. Remove insulation material if applicable.
2. Note positions and unplug the wires to the
spark module.
1/4-in. Screw
1/4-in. Screw
30-in. Model
30-in. Model
30-in. Model
3. Remove 2 screws (1/4-in.) and the mounting
bracket from the cooktop pan (30-in. models
only).
36-in. Model
36-in. Model
36-in. Model
4. Remove the 1/4-in. screw and the spark
module from the mounting bracket.
Spark Module
Spark Module
GEA00775
Spark Module
Spark Module
1/4-in. Screw
1/4-in. Screw
GEA00776

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for GE JGP628

This manual is also suitable for:

Jgp328Jgp962Jgp932Jgp963Jgp933