Related Manuals for My Weigh CTS-3000
Summary of Contents for My Weigh CTS-3000
- Page 1 Precision counting Scale Model NO. CTS-3000 CTS-6000 Operation Manual CTS-3000/6000-en V5.0-2006...
-
Page 2: Table Of Contents
TABLE OF CONTENTS I. Overview ------------------------------------------(1) II. Precautions Before Using The Scale -------------(1) III. Keypad Functions ---------------------------------(2) IV. Operations ----------------------------------------(2) -
Page 3: I. Overview
calibration is end. (External calibration will not work when the I. Overview error is outside the range of ±10% of Max. Capacity). The CTS series electronic counting scale uses high precision (XVI) Recharging the battery sensors and the latest Microchip technology. It is specially When the battery voltage is low, the LOW POWER indicator designed and manufactured for accurate weighing and will be shown. -
Page 4: Iii. Keypad Functions
III. Keypad Functions G=GROSS N=NET 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 : Numeric keys ～ HEAD DATA UNIT : Decimal point key. G/N . (K) g CR LF : If there is a minor weight displayed, without anything 10 11 12 13 14 15 16 17 18 19 20 21 on the pan;... - Page 5 (turn auto-average on). Press key to change, press normal weighing mode. to confirm. (II) Power off- (XIII) Setting backlight Push the switch to “ OFF” to turn the scale OFF. (III) Zero function - Turn the scale ON, Press and hold until the end of the Zero range : + 2% of max.
- Page 6 Users can set a number for counting check, when the (“∩b X” represents a class of filter parameters and the larger “X” number of objects on the pan is larger than the preset checking is, the faster respond speed is. ). number, the alarm will beep repeatedly.
Need help?
Do you have a question about the CTS-3000 and is the answer not in the manual?
Questions and answers
when turning scale on it doesn't self test. It just continually flashes
If the My Weigh CTS-3000 scale does not self-test and continually flashes when turned on, it likely indicates a power issue or startup error, such as improper voltage from the power adapter or low battery. Ensure the scale is on a stable surface, correctly powered with either the 7.4V/0.4A AC/DC adapter or fully charged 6V/1.5Ah NI-MH batteries.
This answer is automatically generated