Buttonhole Programming - DURKOPP ADLER 580 Operating Instructions Manual

10.5 Buttonhole programming

10.5.1 Selection of the programming level
10.5.2 Altering a value
34
The menu system 580 is divided into several levels.
In the main level the most important information for the sewing
operation are indicated.
From this main level it is possible to switch to the programming level
in order to program buttonholes.
A menu item can include further submenu items.
"P"-key Press the "P"-key in order to switch from the main
level to the menu for programming buttonholes. A menu
item will be displayed.
If the menu item has no submenus you will see a value
on the display that you can alter.
If the menu item does include submenus you will see
four dots on the display. The values to this menu item
are to be set in the submenus.
Key ñò Skip with the ñò keys to the desired menu item.
"OK"-key Press the "OK"-key in order to alter the value of the
selected menu item.
If the selected menu item includes submenus, after
pressing the "OK"-key a menu item of the selected
submenu will be displayed. Skip in the same way with
the ñò keys to the desired submenu item and confirm
your selection by pressing the "OK"-key. Now you can
alter the value.
"ç"-key By pressing the "ç"-key you will get back to the
previous level.
"ESC"-key By pressing the "ESC"-key you will always get directly
back to the main level.
Keys ïð With the keys ïð you select the digit of the value you
want to alter.
The values can only be altered in certain steps. The
sewing speed for example can only be altered in steps
of 1000 or 100, i.e. the digits 10 and 1 cannot be
selected.
Keys ñò With the key ñ the value of the selected digit is
increased.
With the key ò the value of the selected digit is
reduced.
All values have a defined minimum and maximum
that cannot be exceeded.
"OK"-key With the "OK"-key you confirm the altered values.
You return to the menu selection.
"ESC"-key With the "ESC"-key you abort the value alteration.
The previous value is reestablished. You return to
the menu selection.