Customizing Your Camera - Changing The Start-Up Image - Samsung VP-D6050 Owner's Instruction Book

The Camera : Advanced Techniques
Customizing Your Camera – Changing the Start-Up Image
Quick Start
✤
This function works in
✤
This function changes the starting image that is displayed when the camera is turned on.
✤
You can select and resize a still image to appear as your new start-up image.
1. Turn your camera on by setting the Power Switch to
2. Set the Mode Dial to any camera modes, then press the MENU button.
The top menu including the
3. Press the LEFT or RIGHT button to select
4. Press the DOWN or UP button to select START IMAGE 3.
You must first select an image to save in START IMAGE 3. See page 130.
5. Press the OK button to save and exit the menu screen.
Reference
✤
START IMAGE 1 and START IMAGE 2 are Samsung logo images and cannot be changed.
✤
START IMAGE 3 should be saved in "START IMAGE" size.
✤
Formatting or deleting the still picture on the memory card does not affect the start-up images. Start-up images are saved in
the built-in internal memory of the Camera.
(CAMERA) mode.
(MYCAM) is displayed.
(MYCAM), then press the DOWN button.
(CAMERA) mode.
ENGLISH
133 133