Using Account Codes - Inter-Tel AXXESS 8560 User Manual

U A
SING CCOUNT
If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to phone record reports that the system will periodically
print.
There are three types of account codes:
•
Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
•
Forced account codes must be dialed before you can place an outside call.
•
Optional account codes can be entered at any time during a call.
NOTE:
Your system administrator can tell you which types of account codes are used
on your telephone system.
To enter an optional account code:
Press
1.
Enter the optional account code. If the account code is not immediately accepted,
2.
press
#
To set an account code for all calls placed from your phone:
Dial
3 9
accepted, press
is disabled.
To disable the code:
Dial
3 9
®
Axxess Model 8560 Phone and Model 8660 IP Phone User Guide
C
ODES
.
and dial
3 9 0
.
and then the account code. If the account code is not immediately
1
. This code will be used for all calls made from your phone until it
#
.
and press
#
1
65