Table of Contents
Advertisement
Ins
Ins
Technical data
Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/24h)
(kWh/year)
Energy class, according to EU standards
Rated power (W)
Weight (kg)
Location
The appliance should be positioned in a well
ventilated, dry room.
Energy use is affected by the ambient temperature.
The appliance should therefore:
not be installed next to radiators, cookers or other
sources of heat
only be installed at a location where the ambient
temperature
corresponds
classification, for which the appliance is designed.
The climate classification can be found on the data
plate.
The following table shows which ambient temperature
is correct for each climate classification:
Climate Classification
SN
N
ST
tr
uctions f
tr
uctions f
ER 5763 C
Ice-making comp.: 5
Fresh food comp.: 65
Ice-making comp.: 5
Fresh food comp.: 62
525
520
587
0,42
153
B
55
24
to
the
climate
Ambient Temperature
+10 to +32 °C
+16 to +32 °C
+18 to +38 °C
or the Ins
or the Ins
Installing the appliance
Transportation, unpacking
The appliance and the interior fitting are protected
for transport.
Remove all packaging and any adhesive tape.
Any remnants of adhesive can be removed using
white spirit.
After transportation the appliance must not be
switched on for 2 hours. This is to allow the
refrigerant to settle.
Cleaning
Clean the accessories and the inside of the
appliance with warm water and bicarbonate of soda
(5 ml to 0.5 litres of water). Rinse and dry
thoroughly.
Do not use detergents, abrasive powders, highly
perfumed cleaning products, wax polishes or
cleaning products containing bleach or alcohol.
t
aller
t
aller
11
Advertisement
Table of Contents
