Table of Contents
Advertisement
Problem
Memory media card
error occurs
You cannot write to
a memory media
card
You cannot read a
file
Pointing device
If you are using a USB mouse, you should also refer to both the
mouse
Touch Pad
Problem
The Touch Pad does
not work.
On-screen pointer
does not respond to
pointing device
operation
Double-tapping
(Touch Pad) does
not work
User's Manual
Procedure
Remove the memory media card from the
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
Remove the memory media card from the
computer and check to ensure that it is not write
protected.
Check to ensure the required file is actually on the
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
section and the documentation supplied with your mouse.
Procedure
Check the Device Select settings.
Click Desktop -> Desktop Assist -> Control
Panel -> Hardware and Sound -> Mouse.
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1.
2.
3.
To access this utility, click Desktop ->
Desktop Assist -> Control Panel ->
Hardware and Sound -> Mouse.
Within the Mouse Properties window, click the
Buttons tab.
Set the double-click speed as required and
click OK.
USB
6-8
Advertisement
Table of Contents
