Table of Contents
Advertisement
Using the Zoom (DVD/VCD)
Zooms the scene to see more specific.
1
Press the Zoom button during playback or Pause mode.
2
Select part of screen to zoom using
press the ENTER button.
1
• DVD : Normal/1.5X/2X/4X
• VCD : Normal/1.5X/2X/4X
3
Press the ENTER button.
• During DVD play : press ENTER to zoom in1.5X/2X/4X/2X/1.5X/
Normal in order.
• During VCD play, press ENTER to zoom in 1.5X/2X/1.5X/Normal
in order.
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene,
you can use the Angle function.
Press the ANGLE button to see if an ANGLE (
1
present at the upper right hand corner of the screen.
1
Press the Angle button when an angle icon is shown at the upper
right hand corner, then angle selection icon will be appeared
at the upper left hand corner.
2
Select desired screen angle using
3
To turn off the display, press the ANGLE button again.
54
DVD player
Using the Bookmark Function (DVD/VCD)
The Bookmark function lets you select parts of a DVD or VCD
(MENU OFF mode) so that you can quickly find the section at a later
time.
buttons, then
1
Press the Mark button during playback.
2
Mark desired scene using the Enter button.
• You can mark up to 3 scenes.
3
Press the Mark button again to turn off menu.
4
Press the Mark button to recall marked scenes, then select a
scene(1, 2, or 3) using
• The marked scene will be played.
5
Delete Mark Number Select a mark number to delete using
buttons, then press the Clear button.
DVD player
) mark is
buttons.
,
ll buttons.
When in VCD 2.0 mode(Menu On mode), this
f u n c t i o n does not work.
The Bookmark function may not work depends on
d i s c .
DVD player
1
55
Advertisement
Table of Contents
