Playing back a tape you have recorded on the LCD
✤ You can monitor the playback picture on the LCD monitor.
✤ Make sure that the battery pack is in place.
1. Hold down the power switch tab and turn it to the
2. Insert the tape you wish to view. (see page 27)
3. Open the LCD screen.
Adjust the angle of the LCD screen and set the
brightness or colour if necessary.
4. Press the
(REW) button to rewind the tape to the
To stop rewinding, press the
The camcorder stops automatically after rewinding
5. Press the
(PLAY/STILL) button to start playback.
You can view the picture you recorded on the LCD.
To stop the PLAY operation, press the
You can also view the picture on a TV screen, after connecting the
camcorder to a TV or VCR. (see page 71)
Various functions are available in playback mode. (see page 73)