Connection To The Mains; Chimney Assembly; Upper Chimney; Lower Chimney - Electrolux EFC60001 User Manual

8 electrolux
Installation/Use

Connection to the Mains

WARNING: Double insulated do
not earth
• Before connecting to the mains sup-
ply ensure the mains voltage corre-
EN
sponds to the voltage on the rating
plate inside the hood.
• This appliance is fitted with a 2 core
mains cable and must be permanently
connected to the electricity supply via
a double-pole switch having 3mm
minimum contact gap on each pole.

Chimney assembly

Upper Chimney

• To fit the upper chimney A, place the
top edge of the chimney over the
bracket C as illustrated and secure
the chimney using two of the 2.9mm
self tapping screws provided.
• The distance H in the height between
the fixing holes X1 and X2 is deter-
mined by the height of the upper
chimney A.

Lower Chimney

• To fit the lower chimney B, apply slight
force to the two rear edges to increase
the width of the apperture, then sleeve
the chimney B over the chimney A as
illustrated.
�
��������