Using The Tap Function - Sony DPS-V55M Operating Instructions Manual

Using the TAP function

This function lets you change the value for a certain
parameter by tapping on the ENTER (TAP) button.
The parameter which responds to the TAP function is
different for each effect, and not all effect have compatible
parameters. However, many time related parameters (such
as Delay Time) are designed to work with the TAP function.
(Refer to the separate Effect Parameter Guide for specific
information.)
The TAP function works the same in either play mode or
edit mode, but not can not be used when any other modes
(such as SYSTEM or SAVE) are active.
To use the TAP function, select a program
containing a compatible effect, then tap
ENTER (TAP) repeatedly to enter the desired
tempo.
The effector's tap editor measures the timing of the last two
taps an sets the corresponding parameter accordingly.
Effects that can be adjusted using the TAP function.
Number Name
7 Rotary Speaker
9 Doppler
15 Stereo Delay
16 Ping Pong Delay
22 Stereo Panner
23 Haas Panner
31 Tremolo
32 Vibrato
34 Pitch Roller
36 Freeze
15
EN