Reading The Display; Outputting Without Effects (Bypass) - Sony DPS-V55M Operating Instructions Manual

Reading the Display

During play mode the display provides various information
about the selected program
0 0 1 S u p e r R e v e r b
F x A : 1 1 / F x B : 1 2
1 2 3
1 Program number and name:
The number (001~400) and name of the current program .
2 FxA On/Off symbol:
"•" : FxA is on (in the illustration, FxA is on).
(Blank) : FxA is off
3 FxA effect number:
The number (01~45) of the effect assigned to the current
program's FxA block.
The effect numbers correspond to those printed on the front panel
to the left of the display. When a 4ch effect is assigned to the FxA
block, the FxB effect number and the structure symbol do not
appear in the display.
4 Structure symbol:
"/" (Parallel) : To use FxA and FxB separately (the
illustration shows a parallel structure).
"m" (Serial) : To feed the output of FxA into FxB for
additional processing.
The structure symbols correspond to those printed on the front
panel below the display. (See page 8 for details.)
5 FxB On/Off symbol:
"•" : FxB is on
(Blank) : FxB is off (in the illustration, FxB is off).
6 FxB effect number:
The number (10~45) of the effect assigned to the current
program's FxB block.
The effect numbers correspond to those printed on the front panel
to the left of the display.
4 5 6

Outputting Without Effects (BYPASS)

The bypass function allows you to output the original signal
without adding any effects. This function can also be set to
completely cut (mute) the sound output from the processor
(see page 18 if you want to switch to muting).
Press BYPASS to activate the bypass (mute)
function.
"BYPASS" (or "MUTING") appears in the display.
< < B Y P A S S > >
Press again to cancel and output with effects.
11
EN