Download Table of Contents Print this page

Replacing Carbon Brushes - Makita BSS500 Instruction Manual

Hide thumbs Also See for BSS500:

Advertisement

Table of Contents
1
007981
007982

Replacing carbon brushes

001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
007983
1. Adjusting screw
for 90 ゚
1. Triangular rule
1
1. Limit mark
1
1. Brush holder
cap
1
2. Screwdriver
2
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Saw blades
Rip fence (Guide rule)
Hex wrench 5
Dust nozzle
Makita genuine batteries and charger
11
or
attachments
Only use
accessory or
are

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bss501

Table of Contents