Cisco Small Business AP541N Administration Manual page 75

4
NOTE
70
Table 16 WPA Enterprise Field Descriptions
Field Description
Enter the RADIUS key in the text box.
RADIUS Key
The RADIUS Key is the shared secret key for the global
RADIUS server. You can use up to 63 standard alphanumeric
and special characters. The key is case sensitive, and you
must configure the same key on the access point and on your
RADIUS server. The text you enter is displayed as "*"
characters to prevent others from seeing the RADIUS key as
you type.
Enter the RADIUS key associated with the configured backup
RADIUS Key
1–3 RADIUS servers. The server at RADIUS IP Address-1 uses
RADIUS Key-1, RADIUS IP Address-2 uses RADIUS Key-2,
and so forth.
Select this option to track and measure the resources a
Enable RADIUS
Accounting particular user has consumed such as system time, amount
of data transmitted and received, and so forth.
If you enable RADIUS accounting, it is enabled for the
primary RADIUS server and all backup servers.
Enter a value to set the interval at which the broadcast
Broadcast Key
Refresh Rate (group) key is refreshed for clients associated to this VAP.
The valid range is 0–86400 seconds. A value of 0 indicates
that the broadcast key is not refreshed.
Enter a value to set the interval at which the access point will
Session Key
Refresh Rate refresh session (unicast) keys for each client associated to
the VAP.
The valid range is 0–86400 seconds. A value of 0 indicates
that the broadcast key is not refreshed.
After you configure the security settings, you must click Apply to apply the changes
and to save the settings.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Modifying Virtual Access Point Settings
Wireless