Mechanical Instructions; Loader Cdl4009; Figure - Philips CDR570 Service Manual

Mechanical instructions

4. Mechanical instructions
4.1

Loader CDL4009

CDL4009 consists of metal loader bracket item 82 and glued
on it an identification sticker (on which the module production
number and production code is printed); 4 suspension rubbers
items 76, 77, 78 and 79 which carry loader assembly item 81;
LOADER BRACKET
82
SUSPENSION
76 77 78 79
81
LOADER ASSY CDL
MAIN BOARD CDR
1001
M3 X 6
97 98 99 100
82: LOADER BRACKET
81: LOADER ASSY CDL
76: SUSPENSION
To demount loader module CDL4009:
1. Mainboard item 1001. Beware of connections to CDM.
Optical pick-up unit has to be ESD protected!
2. Loosen suspensions 76, 77, 78 and 79 from metal loader
bracket 81
3. Take out Loader assy CDL
and on the bottom side the CDR mainboard 1001 is mounted.
Notice that mainboard is dependant to the applied set and has
to be adjusted to mounted CDM in loader in case of exchange.
See next figure, Loader CDL4009
3104 121 23900
9305 043 20900
3104 144 05730
CL06532018_001.eps
090300

Figure 4-1

CDR 3rd gen. 4. GB 7