Beeper Definitions - Motorola Symbol DS9808 Product Reference Manual

2 - 2 Symbol DS9808 Product Reference Guide

Beeper Definitions

The digital scanner issues different beep sequences and patterns to indicate status.
sequences that occur during both normal scanning and while programming the digital scanner.
Beeper Definitions
Table 2-1
Beeper Sequence
Standard Use
Low/medium/high beeps
Short high beep
4 long low beeps
5 low beeps
Low/low/low/extra low beeps
High beep
RFID
Medium-high (two-tone) beep
High-medium/low/low beeps
Image Capture
Low beep
High/low beeps
Parameter Menu Scanning
Low/high beeps
High/low beeps
High/low/high/low beeps
Code 39 Buffering
High/low beeps
3 long high beeps
High/low/high beeps
Low/high/low beeps
Low/high beeps
Macro PDF
2 low beeps
2 long low beeps
Power up.
A bar code symbol was decoded (if decode beeper is enabled).
Transmission error.
Conversion or format error.
RS-232 receive error.
The digital scanner detected a <BEL> character over RS-232.
An RFID tag was read (if RFID read beeper is enabled).
Unexpected RFID indication.
Snapshot mode started or completed.
Snapshot mode timed out.
Input error; incorrect bar code, programming sequence, or Cancel scanned.
Keyboard parameter selected. Enter value using numeric bar codes.
Successful program exit with change in parameter setting.
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
The Code 39 buffer was erased.
The Code 39 buffer was erased or there was an attempt to clear or transmit an
empty buffer.
A successful transmission of buffered data.
MPDF sequence buffered.
File ID error. A bar code not in the current MPDF sequence was scanned.
Table 2-1
Indication
defines beep